Unbox And Set Up - Your Guide To New Shower Unit Installation

Contact Us Today



What're your thoughts on How to Install a Shower Enclosure ?


How to Install a Direct-to-Stud Shower Enclosure
A successful shower installment needs mindful planning and a lot of job. Most of the times, you will certainly need to do three kinds of tasks: framing wall surfaces, mounting the plumbing, and finishing walls.

Prep work


To start with, you must choose the kind of shower that you want to mount. It is important to identify whether the picked shower is capable of coping with certain systems and can control a risk-free degree of water with the central heating boiler. The majority of shower devices nowadays are made to be flexible to different water pressures (such as stored hot water as well as cool keys).
It is additionally vital to think about the water stress and the preparation of the piping and drainage for the shower

Different Kinds Of Shower Units


  • Push-on Mixer: The tube and also spray parts of the push-on mixer shower device can be attached to the bathroom tap as per your requirement, as well as the water temperature level can be readjusted using the faucets. Push-on mixers are cheap and extremely easy to set up. Nevertheless, although the hose pipe connection is simple, it is easily dislodged. Furthermore, it is troublesome to change the temperature.

  • Bath/Shower Mixer: The pipe as well as spray of this type of shower are combined with a bath mixer tap, and the temperature can be adjusted through the bath taps. It is a very inexpensive option and no extra plumbing is involved. However, the bath/shower mixers likewise experience troublesome temperature control options.

  • Manual Mixer: The hose and spray of a hand-operated mixer shower device belong of the wall unit and the cold and hot water products are attached to a solitary valve The temperature and stress of the water are regulated with either one or a range of knobs (in more pricey showers). Although temperature control is a lot easier in hand-operated mixer kinds, they are much more expensive than the previously stated mixers. They additionally need added plumbing of cold and hot water system pipes.

  • Thermostatic Mixer: The tube as well as spray of this shower type are a part of the wall surface system and the cold and hot water materials are connected to a solitary shutoff right here as well. It is complete with a built-in stabiliser to self-adjust the water temperature level as well as to prevent it from coming to be as well hot. Among the greatest benefits of a thermostatic mixer shower type includes hassle-free temperature control. However, it is one of the most expensive of the various mixer choices.

  • Power Shower: A power shower is a single device including an effective electric pump that can changing both the water stress as well as temperature. This kind of shower can be fitted if there is supply of water from a cold water tank and a warm water cylinder. A power shower makes the change of both pressure as well as temperature level easy. On the other hand, it disagrees for water heated straight by the shower or where the water is supplied by a mix boiler under keys pressure.

  • Electric Shower: An electrical shower is plumbed into a keys cold water supply as well as it warms the water electrically. It is very important to note that for this shower kind to be installed, the keys pressure requires to be a minimum of 0.7 kg/sq centimeters (10lb/sq in). The unit permits the temperature as well as pressure to be changed using a knob. Designs with temperature stabilisers are better as they remain untouched by various other taps in other places in use within the family. A significant drawback of electrical showers is that the control knob just allows for the alternative of high temperatures at less stress, or lower temperatures at a greater stress. This is problematic in the winter when the spray is usually weak and the mains water is cooler. Nonetheless, this problem is dealt with in some versions which are available with a winter/summer setting.


  • Approach


    Depending on the sort of shower you wish to set up, the shower head have to either be fitted in order to avoid its contact with the water in the bathroom listed below or the base tray, or it must have a check valve.
    Prior to beginning, it is advisable to note the positions of the shower head and control, as well as to intend the pipe-work entailed. Additionally, the drain system to remove the waste water will require to be intended. Both placements of the cable route as well as the shower switch will certainly likewise need to be thought about if an immediate or electrical shower device is being mounted.
    Use the instruction guide offered with the shower system to fit the shower control.Before suitable the pipelines that will provide the water to the shower system, it is necessary to remove the water system. In order to secure the pipelines, they need to be offered a water-proof covering as well as additionally fitted with separating shutoffs. The pipelines can then be buried into the wall as well as glued over to neaten the general look.
    Fit the base tray, shower head, and installations.
    Attach the main shower control to the pipes that will be supplying the water (This may require a women screw string adapter).
    Reconnect the water supply and test the pipes for any kind of leaks, as some might require firm.
    If you are setting up an electric shower, keep in mind to switch off the electrical power supply before making any electric links. When these connections have been made (there should be guidance within the instruction manual), the power supply can be switched over back on.

    Readjusting Water Stress to Suit Your Shower


    The cold water storage tank can be raised to a greater elevation (occasionally as low as 150mm (6inches)) by fitting a strong wood assistance underneath it - possibly composed of struts and also blockboards. If you select this choice, the main and also circulation pipes will additionally need to be raised to satisfy the new elevation of the storage tank.
    Additionally, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever kind is chosen, it has to be linked into the power supply in order to run.

    Piping as well as Drainage


    It is best to make use of 15mm size supply pipes, and also make the go to the shower as short and also straight as possible so as to keep maximum stress as well as minimise warmth loss. Furthermore, by reducing making use of elbow joints for pipeline edges, you can decrease the resistance in the circulation of the water. You can accomplish this by flexing the pipelines instead.

    The Majority Of Common Blunders


  • Breaking or disregarding neighborhood code limitations.

  • Making use of pipes that are also little.

  • Affixing copper to galvanized without utilizing a brass or dielectric suitable between both.

  • Not utilizing tape or pipeline compound at threaded joints.

  • Uneven your fixtures when installing them.

  • Not installing an air gap filling up for components.

  • Reducing supply stub outs too short to mount the shutoff valves onto after the completed wall surface is in place.

  • Not correctly straightening tubing into fittings or stop shutoffs. (Compeling the nut onto the compression ring at an angle when the tubing is at an angle will certainly create a leakage.).

  • When turning the water back on in your home, always run the outside pipe shutoff or purge your toilets to bleed dust and also air from the lines. This particles can cause troubles in your sink faucets and other plumbing trim.



  • Shower enclosures for bathrooms


    It makes your bathroom look like a luxury suite:


    Installing a new shower cubicle in your bathroom is an excellent way to make it look like a luxury suite. Nothing says modern elegance like a glass shower enclosure. Made with 8 mm easy clean glass, Jauqar shower enclosures come in varied colors and sizes to fit perfectly with your existing bathroom size & decor. The high-quality enclosures come with concealed fixings and silent cushion closing to ensure a great showering experience.


    Adds style to your bathroom:


    Shower cubicles are one of those shower products that can make your bathroom look modern, wide, and visually appealing. Jaquar shower enclosures are available in various styles, so you can find the one that fits your bathroom's overall design. Whether you prefer rectangular enclosures or fancy curved designs, Jaquar has it all.


    Enhances Personal Hygiene:


    Waking up in the morning to a filthy, muddy bathroom can ruin your day. Jaquar shower enclosure helps keep your bathroom clean and hygienic. A shower enclosure helps keep the water inside and off your bathroom flooring. Allowing water to spill out on a hard surface can lead to mold, mildew, and build-up on the tiles and other flooring surfaces, which can be unhygienic and unattractive.



    As all Jaquar shower enclosures are built to conform to the highest safety standards, you can be rest assured that they are completely watertight. This means you won't have to worry about leakages damaging your bathroom floor or ceiling—or worse yet, creating mold and mildew.


    Elevates your shower experience:


    A great shower combines many factors - optimum water pressure, apt water temperature, and great aesthetics during and after the shower. After all, who loves to clean the dirty floor just after a relaxing shower? With Jaquar shower enclosures, you can improve your experience by keeping the water within a specific area, so there is no cleaning post your shower. Offering style and function, our shower enclosures make your everyday life easier.


    Space-effective:


    Shower enclosures give you more space without sacrificing style. It can be a challenge finding both in today's modern bathroom, but a Jaquar shower enclosure will provide you with both. Unlike big, bulky shower enclosures, Jaquar's shower enclosures come in standard sizes that are good enough to fit any space- from large bathrooms with walk-in closets to bathrooms that need extra storage space. You can also customize the size as per your preference.


    Ensures safety with impressive safety features:


    Jaquar shower enclosures are designed with the highest safety standards. They come in different sizes and designs, along with toughened safety glass, high-quality hinges, and locking mechanisms that help keep you safe from injury while allowing you to feel at ease when taking a relaxing shower. A secure enclosure means no chance of slipping on wet bathroom floors.

    https://www.jaquar.org.uk/blog/why-shower-enclosure-are-important


    How to Install a Shower Enclosure

    As a passionate person who reads about How to Build a Shower Enclosure for Your DIY Bathroom, I imagined sharing that piece was really useful. Sharing is nice. You just don't know, you could be doing someone a favor. We love reading our article about How to Build a Shower Enclosure for Your DIY Bathroom.




    Go Services


    Leave a Reply

    Your email address will not be published. Required fields are marked *